What size dumpster do I need to remove a deck?

A 20-yard roll-off — the only size KYN Hauling offers — handles nearly every residential deck removal. A wood deck of 300-400 sq ft typically fills only a third to half of the box; composite decking of the same size fills similarly but weighs more per board, so tonnage becomes the limiting factor before space does.

Is a composite deck heavier to dispose of than a wood deck?

Yes. Composite and PVC decking is denser than pressure-treated wood, so the same square footage weighs noticeably more. A composite tear-off can approach the included 2-ton weight limit while the dumpster still looks well under half full by volume.

Do concrete footings from a deck count toward my weight limit?

Yes, and they usually count the most. Concrete piers, footings, or a slab under a deck are the heaviest material in a typical deck demo job — even a small amount of broken concrete can add hundreds of pounds toward your included 2-ton limit.

Will a dumpster for deck removal fit in my driveway?

Yes. The 20-yard roll-off is about 22 feet long, 8 feet wide, and 4 feet high, which fits a standard residential driveway. Because deck debris often includes nail-studded boards, ask about $25 driveway protection boards when you book.

How much does a dumpster for deck removal cost in North Port or Port Charlotte?

Standard 7-day rental starts at $485 with 2 tons included, or $299 for a 24-hour rental, in North Port and Port Charlotte. Punta Gorda adds $10, Englewood adds $15, and Arcadia adds $25 to the base price; Venice is quoted per job.

Do I need a permit to put a dumpster on my driveway for a deck tear-off?

No permit is needed if the dumpster stays on your own driveway. A permit or city/county approval is only required if the roll-off has to sit in the public right-of-way instead.

What Size Dumpster for a Deck Removal? Wood vs Composite vs Concrete

Quick answer: A standard 20-yard roll-off is the right (and only) size KYN Hauling offers, and it's also the right call for almost every deck removal in Southwest Florida. A wood deck of roughly 300-400 sq ft fills about 1/3 to 1/2 of a 20-yarder. A composite deck the same size runs heavier per board but similar volume, so it still fits — you just may hit the 2-ton weight line sooner. If the deck sits on a poured concrete footing or slab you're demoing too, that's where tonnage — not space — becomes the limiting factor, not the box.

Why deck removal is a weight problem, not a size problem

Most homeowners pulling a deck are surprised that the dumpster they need is easy to pick, but the tonnage that comes with it is the part that trips people up. Deck debris is bulky but not that dense — a torn-off wood deck bounces around inside a roll-off, taking up a lot of visual "room" without weighing much. Composite decking flips that: it's denser per board foot, so the same square footage weighs noticeably more. And if you're also breaking out old concrete piers, footings, or a slab the deck sat on, that material is by far the heaviest thing going into the box. KYN Hauling runs one size — the 20-yard roll-off — for every residential job, and for deck removal it's sized right in almost every case. The question isn't "will it fit," it's "will I stay under my included tonnage."

Typical deck volumes: what actually fills a 20-yard dumpster

A 20-yard roll-off holds about 7-8 standard pickup truck loads of debris. Here's roughly how far common deck sizes get you into that space:

Deck size	Wood deck (fill of 20-yd)	Composite deck (fill of 20-yd)
Small (up to ~150 sq ft, e.g. a back porch deck)	~15-20%	~15-20%, heavier per load
Mid-size (~300-400 sq ft, typical SWFL deck)	~30-45%	~30-45%, watch tonnage closely
Large (600+ sq ft, wraparound / multi-level)	~55-70%	Space fine; tonnage likely the limit

These are estimates, not guarantees — the actual amount depends on board thickness, joist and beam size, railing style, and how much is left intact versus broken into pieces. For a general sense of how deck debris compares to other project types, see our how much fits in a 20-yard dumpster breakdown and the full dumpster size guide.

Wood vs. composite vs. concrete footings: what changes and why

Not all decks come apart the same way, and each material changes what you should watch for once the dumpster is on-site.

Pressure-treated wood decking: Lightest of the three per square foot. Boards and joists take up volume fast but rarely push tonnage on their own — unless the wood is soaked from rain, which adds real weight.
Composite / PVC decking: Denser boards mean more weight in less visual space. A composite deck that "looks" half-empty in the box can already be close to the 2-ton line included in your rental. Budget for possible overage.
Concrete footings, piers, or a slab: This is the heaviest material on almost any deck job. Even a handful of broken footings can add hundreds of pounds. If you're demoing footings along with the deck, plan to load concrete separately toward the bottom and expect it to be the main driver of your tonnage — see our guide on concrete, dirt, and sod in a dumpster for cost specifics.
Railings, hardware, and old fasteners: Metal hardware and old fastener debris are light but sharp — load them carefully and don't overfill above the fill line.

Weight limits explained for deck jobs

Every KYN Hauling 20-yard rental includes 2 tons of weight. Go over that and overage runs $80-90 per ton — which matters most on composite and concrete-footing jobs, less on straight wood tear-offs. For a full breakdown of how tonnage is calculated and what pushes a job over, read dumpster weight limits explained. If your deck demo is bundled with a bigger renovation — pulling the deck plus doing a kitchen or bath remodel in the same window — the combined debris can change your size math entirely; see our remodel dumpster guide.

Placement: protecting your driveway during a deck tear-off

A 20-yard roll-off (about 22 feet long, 8 feet wide, 4 feet high) fits a standard driveway, and deck debris — splintered boards, nail-studded lumber, broken footing chunks — is exactly the kind of load where driveway protection pays off. Loose boards and debris can scratch pavers or crack older concrete when they're set down or dragged across the surface. Ask about driveway boards ($25) when you book, and read how to protect your driveway during a dumpster rental before delivery day. Placement on your own driveway needs no permit; if the box has to sit in the public right-of-way instead, check our permit guide first.

What it costs and how to book

Standard 7-day rental starts at $485 (2 tons included) in North Port and Port Charlotte, with a 24-hour option at $299 for fast weekend tear-outs. Pricing shifts slightly by zone: Punta Gorda adds $10, Englewood adds $15, Arcadia adds $25, and Venice is quoted per job. Contractors handling deck demo as part of a renovation business can lock in $425-450 for 7 days or $499-525 monthly — see contractor accounts. Full zone-by-zone numbers live on our pricing page.

Need it faster than a standard delivery window allows? Our same-day dumpster rental service covers North Port and Port Charlotte for jobs that can't wait.

Deck removal by area

Not sure if your project is a deck-only job or something bigger? Compare against our guides on garage and estate cleanouts or whole-house renovation dumpster sizing, and check what can't go in a dumpster in Florida before you start pulling boards — treated lumber and hardware are fine, but certain coatings and chemicals may not be.

See more answers on our FAQ page, or book online in 2 minutes.